Tight Bore Barrel
5 posters
Page 1 of 1
Tight Bore Barrel
http://www.airsoftatlanta.com/product_p/58176.htm
I saw this barrel. And I wondered. Is this a good idea? I mean, I dunno if I want to invest into a gun that is having problems I have no idea how to solve. BUT. I really do think this would be nice to increase accuracy possibly. I mean, in your guys' oppinions. Is it worth it?
I saw this barrel. And I wondered. Is this a good idea? I mean, I dunno if I want to invest into a gun that is having problems I have no idea how to solve. BUT. I really do think this would be nice to increase accuracy possibly. I mean, in your guys' oppinions. Is it worth it?
Re: Tight Bore Barrel
yes i think its a good idea because when u take it apart to put the new barrel in there, you might find the problem so, I say go ahead!
TheTerminator- 1stSgt
- Posts : 200
Join date : 2010-01-30
Age : 28
Location : Niceville, Florida
Re: Tight Bore Barrel
If you dont know how to take apart yor gun you can go on to evike and they hve vidios on how to take apart your gun.
wilcthalacker- SgtMaj
- Posts : 401
Join date : 2010-02-13
Age : 29
Location : Crestview/Mossyhead
Re: Tight Bore Barrel
Yeah, i've never actually taken apart my gun. I would rather be around someone who knows what they are doing because i'd fuck it up. LOL
Re: Tight Bore Barrel
Buy a G&G gun and it has a 6.035 barrel in it already.
cillercarl- President
- Posts : 444
Join date : 2009-12-19
Age : 53
Location : crestview
Re: Tight Bore Barrel
Oh also! How can I be sure this barrel is better then the one that is already in my rifle? I mean, it says Systema and Tight Bore. Both very good terms to be preceding a 30 dollar price tag. However, I am still a noob when it comes to internals. So, any info?
Re: Tight Bore Barrel
better buy=
http://www.rsov.com/express/product.php?langId=1¤cyId=1&manufacturerId=10&prodId=2967
Or get the whole gun with 6.035 barrel in it.=
http://www.airsoftpost.com/product_info.php?cPath=21_44_218&products_id=32095
http://www.rsov.com/express/product.php?langId=1¤cyId=1&manufacturerId=10&prodId=2967
Or get the whole gun with 6.035 barrel in it.=
http://www.airsoftpost.com/product_info.php?cPath=21_44_218&products_id=32095
cillercarl- President
- Posts : 444
Join date : 2009-12-19
Age : 53
Location : crestview
Re: Tight Bore Barrel
Either way is fine, Just go too evike and watch the video's for the AK47's , I mean your only swapping out the Barrel, so this means your only messing with the Hop up and barrel, if your going to buy an barrel you might as buy the Bucking and such for your Hop up. Anyways getting off subject, just go watch the videos and then decide from there!
Howie- SSGT
- Posts : 137
Join date : 2009-12-10
Age : 48
Location : Milton, Florida
Re: Tight Bore Barrel
That should be it! pretty much,
Howie- SSGT
- Posts : 137
Join date : 2009-12-10
Age : 48
Location : Milton, Florida
Re: Tight Bore Barrel
Any suggestions for a cheap but good one? I don't know how much they normally go for.
Re: Tight Bore Barrel
any where from 6.00 to 20.00 bucks for bucking, best deal is get the packs with two.
Howie- SSGT
- Posts : 137
Join date : 2009-12-10
Age : 48
Location : Milton, Florida
Re: Tight Bore Barrel
evike or Airsoft Atlanta
Howie- SSGT
- Posts : 137
Join date : 2009-12-10
Age : 48
Location : Milton, Florida
Re: Tight Bore Barrel
I'm on Airsoft Atlanta and i'm seeing stuff like. Normal Bucking, Rubber bucking, Hard bucking, I don't really understand. I did find this one. http://www.airsoftatlanta.com/product_p/35501.htm
Re: Tight Bore Barrel
FOXHOUND_SIN wrote:I'm on Airsoft Atlanta and i'm seeing stuff like. Normal Bucking, Rubber bucking, Hard bucking, I don't really understand. I did find this one. http://www.airsoftatlanta.com/product_p/35501.htm
The higher the FPS the harder the bucking should be.
you are prob. in the normal bucking range with your AK.
cillercarl- President
- Posts : 444
Join date : 2009-12-19
Age : 53
Location : crestview
Re: Tight Bore Barrel
The one I posted doesn't say anything about it's strength but do you think that one would work that I posted above?
Re: Tight Bore Barrel
Yes I would say that would work, you can call A/A and ask if it is the right one.
cillercarl- President
- Posts : 444
Join date : 2009-12-19
Age : 53
Location : crestview
Similar topics
» looking to buy a barrel
» 2/25/2012 Game at Southern Command, bi-weekly game day
» under barrel shotgun
» 509 mm TK TWIST Barrel
» longer barrel for the 614
» 2/25/2012 Game at Southern Command, bi-weekly game day
» under barrel shotgun
» 509 mm TK TWIST Barrel
» longer barrel for the 614
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|