Homemade - Mag Pulls! Dirt Cheap!
3 posters
Page 1 of 1
Homemade - Mag Pulls! Dirt Cheap!
So, now that I have my room all setup I have decided to start doing reviews & little write ups like these to help everyone who would like to know how to do things they may of seen or heard about. First on my list is Homemade Mag Pulls.
Mag pulls from different Airsoft retailers will range from 3$ to 6$.
For the price of one roll of tape.. 1.50$? 3.00$? You could MAKE 20,30,40 mag pulls... See the money Breaks down to something like .05 cents a mag? So here we go!
Things you will need!
1) A roll of Duct tape or Electrical Tape
2) Scissors
3) Mags
Step 1)
Cut a piece of tape around 3-6inches in length. *NOTE* If you are using mags in which you have to wind up, make sure you have enough room to get your finger in easily to wind them up! If your using mid caps then just make it whatever feels right!
Step 2)
Cut the piece down the center to make 2 long thin pieces
Step 3)
Place the two strips together sticky side inside
Step 4)
Repeat steps 1 & 2
Step 5)
Place the strip you made on step 3 onto one of the thin strips you just cut
Step 6)
Place the strip on the mag, making sure the pull is as close to center as you can
Step 7)
Wrap the bottom of the mag with the strip.
Step
Repeat step 6 & 7 with the other end of the pull strip
Step 9) YOUR DONE!
There ya go! I happen to stumble across the digital duct tape @ wallmart lol. Next time I will use a better camera then my iphone.. yuck. Tell me what yall think! If you like this I'll keep doing more things like this! Everyone loves to save some money!
Mag pulls from different Airsoft retailers will range from 3$ to 6$.
For the price of one roll of tape.. 1.50$? 3.00$? You could MAKE 20,30,40 mag pulls... See the money Breaks down to something like .05 cents a mag? So here we go!
Things you will need!
1) A roll of Duct tape or Electrical Tape
2) Scissors
3) Mags
Step 1)
Cut a piece of tape around 3-6inches in length. *NOTE* If you are using mags in which you have to wind up, make sure you have enough room to get your finger in easily to wind them up! If your using mid caps then just make it whatever feels right!
Step 2)
Cut the piece down the center to make 2 long thin pieces
Step 3)
Place the two strips together sticky side inside
Step 4)
Repeat steps 1 & 2
Step 5)
Place the strip you made on step 3 onto one of the thin strips you just cut
Step 6)
Place the strip on the mag, making sure the pull is as close to center as you can
Step 7)
Wrap the bottom of the mag with the strip.
Step
Repeat step 6 & 7 with the other end of the pull strip
Step 9) YOUR DONE!
There ya go! I happen to stumble across the digital duct tape @ wallmart lol. Next time I will use a better camera then my iphone.. yuck. Tell me what yall think! If you like this I'll keep doing more things like this! Everyone loves to save some money!
Rob- LtGen
- Posts : 440
Join date : 2009-10-06
Age : 40
Location : Fort Walton Beach, Florida
Re: Homemade - Mag Pulls! Dirt Cheap!
Awsome idea. I think im going to do that now when i get home.
wilcthalacker- SgtMaj
- Posts : 401
Join date : 2010-02-13
Age : 29
Location : Crestview/Mossyhead
Re: Homemade - Mag Pulls! Dirt Cheap!
I WAS going to do it but. How many AK mags do you see with Magpuls. On a side note, I got 75 Headshots with my AK and now it's digital camo for real. That's the same tape I used. XD
wilcthalacker- SgtMaj
- Posts : 401
Join date : 2010-02-13
Age : 29
Location : Crestview/Mossyhead
Similar topics
» Homemade Ghillie. I'm aware they are hard to make.
» very cheap gun
» cheap red dot sight
» WTB Ak47, cheap
» Selling my two blackhawk vests, cheap
» very cheap gun
» cheap red dot sight
» WTB Ak47, cheap
» Selling my two blackhawk vests, cheap
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|